Timing belt Optibelt 75 AT5 / 9200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 AT5 / 9200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 AT5 / 9200 AFX and any equivalents.
The Optibelt 75 AT5 / 9200 AFX is an Alpha Flex timing belt with an AT5 profile, a 9200 mm length and a 5 mm pitch. When you need to match a belt being replaced, this page gives you the exact references to compare against the old belt.
Matching starts with the marking on the back of the belt you are removing. Confirm that it reads AT5 for the profile, 9200 mm for the length and 5 mm for the pitch, and that the part number 75 AT5 / 9200 AFX corresponds to what you need. The Alpha Flex series from Optibelt is what we carry under this reference.
If the old belt is worn or the marking is no longer legible, measure the belt and note the profile and pitch before ordering. A belt with the same profile and length but a different construction can still change how the drive runs, so use the full part number rather than profile alone. For drives with more than one belt, replace all belts at the same time so they share the load evenly.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 9200mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the belt being replaced. You need to see an AT5 profile, a 9200 mm length and a 5 mm pitch, along with the part number 75 AT5 / 9200 AFX.
- What should I send to get a quote?
- Send the part number 75 AT5 / 9200 AFX, the quantity you need, and any details from the old belt marking. If the marking is unreadable, send the profile, length and pitch you measured.
- Can I replace just one belt on a multi-belt drive?
- For drives that use more than one belt, it is standard practice to replace the full set at the same time. Mixing a new belt with worn belts can cause uneven load sharing.