Timing belt Optibelt 75 AT5 / 6000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 AT5 / 6000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 AT5 / 6000 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 75 AT5 / 6000 AFX. It uses the AT5 profile with a 5 mm pitch and a 6000 mm length. It is a synchronous belt for drives that require precise tooth engagement.
Timing belts like this Optibelt Alpha Flex are common on industrial drives where shafts must stay synchronized, such as positioning axes, conveyor sections and auxiliary drives. The AT5 profile and 5 mm pitch define the tooth geometry that must match the pulleys. The 6000 mm length suits long-center drives or multi-pulley layouts.
To confirm fit, read the marking on the back of the old belt and compare it with the code 75 AT5 / 6000 AFX. Check that the profile is AT5, the pitch is 5 mm and the length is 6000 mm. Also inspect pulley tooth condition and alignment before ordering, since worn pulleys can damage a new belt.
When you request a quote, send the full belt code, the quantity and a photo of the back marking if it is legible. If the original belt is not readable, provide the pulley tooth profile, the number of teeth on each pulley and the center distance so we can help identify the correct belt.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 6000mm
Frequently asked questions
- How do I confirm this Optibelt 75 AT5 / 6000 AFX belt fits my drive?
- Compare the code on the back of your existing belt with 75 AT5 / 6000 AFX. Verify the profile is AT5, the pitch is 5 mm and the length is 6000 mm. Also check that the pulleys are AT5 profile and in good condition.
- What should I send to request a quote for this belt?
- Send the full part number 75 AT5 / 6000 AFX, the quantity you need and a photo of the belt marking if possible. If the marking is worn, include the pulley tooth profile, tooth counts and center distance.
- Can I use this belt on a drive that originally had a different profile?
- No. The AT5 profile and 5 mm pitch must match the pulleys. Using a different profile can cause poor tooth engagement and rapid wear. Confirm the pulley profile before ordering.