Timing belt Optibelt 75 AT5 / 2400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 AT5 / 2400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 AT5 / 2400 AFX and any equivalents.
The Optibelt 75 AT5 / 2400 AFX is an Alpha Flex timing belt with an AT5 profile, a 2400 mm length and a 5 mm pitch. Before fitting this synchronous belt, inspect the drive and sheaves so the new belt runs correctly from the first start. We carry this belt and quote by part number through WhatsApp or email.
Start with the sheaves. Check the grooves for wear, debris or damage, and confirm the teeth are clean and uniform. A worn or contaminated sheave can shorten belt life and cause noise or tracking problems. Also check the shafts, bearings and tensioner for play or roughness, and correct any misalignment before the belt goes on.
Confirm the belt marking on the old part matches the profile and length you need. This belt is AT5 profile, 2400 mm long, with a 5 mm pitch, and the part number is 75 AT5 / 2400 AFX. If the old belt is worn or the marking is unreadable, measure the length and identify the profile from the sheaves.
Send the part number, the profile and the length when you request a quote. If you are replacing more than one belt on the same drive, include all the part numbers so we can help you match the set. Our team replies promptly and can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 2400mm
Frequently asked questions
- What should I check before installing this timing belt?
- Inspect the sheaves for wear, debris and damaged teeth, and check the shafts, bearings and tensioner for play or roughness. Correct any misalignment before fitting the belt.
- How do I identify the belt I need?
- Read the marking on the back of the old belt. This belt is marked 75 AT5 / 2400 AFX, with an AT5 profile, a 2400 mm length and a 5 mm pitch.
- What information should I send for a quote?
- Send the part number, profile and length. If you are replacing multiple belts on the same drive, include all part numbers so we can help you match the set.