Timing belt Optibelt 75 AT20 / 9000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 AT20 / 9000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 AT20 / 9000 AFX and any equivalents.
The Optibelt 75 AT20 / 9000 AFX is a timing belt in the Alpha Flex series with an AT20 profile, a 9000 mm length and a 20 mm pitch. When you are replacing a belt, the most reliable approach is to match the marking on the old belt to these values. This page gives you the details needed to confirm the replacement.
To match this belt to the one being replaced, read the marking on the back of the old belt. Confirm the profile is AT20, the length is 9000 mm and the pitch is 20 mm. If the existing belt carries the same part number, 75 AT20 / 9000 AFX, it is a direct reference. If the number is different, compare the profile, length and pitch rather than relying on the part number alone.
Because timing belts are often replaced as part of a drive service, inspect the pulleys and the belt path at the same time. Check for worn pulley teeth, misalignment or debris that could affect the new belt. Record the belt marking before removal so the replacement can be verified against the data above.
If you need help confirming the right belt, send the part number, the belt marking or a photo of the back of the belt to our team by WhatsApp or email. We carry the Optibelt 75 AT20 / 9000 AFX and can help you confirm it against your application.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 9000mm
Frequently asked questions
- How do I confirm this is the correct replacement belt?
- Compare the profile, length and pitch on your old belt to the AT20 profile, 9000 mm length and 20 mm pitch of this belt. The part number 75 AT20 / 9000 AFX can also be used as a reference.
- What information should I send to request a quote?
- Send the part number 75 AT20 / 9000 AFX, or the full marking from the back of the belt you are replacing. If the marking is unclear, include the profile, length and pitch you measured.
- Can you help if the old belt number is different?
- Yes. Send the old belt number or a photo of the marking. We will compare the profile, length and pitch to this Optibelt belt and help you confirm the match.