Timing belt Optibelt 75 AT10 / 7800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 AT10 / 7800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 AT10 / 7800 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by its AT10 profile and 7800 mm length. The 10 mm pitch defines the tooth spacing along the belt. Use these three values to confirm the belt matches your drive before requesting a quote.
The AT10 profile is a synchronous belt tooth profile. The 10 mm pitch is the distance from one tooth center to the next. The 7800 mm length is the belt's datum length. Together with the 75 designation in the part number, these dimensions let you match the belt to a specific drive layout.
When reading the marking on the back of an old belt, check for the profile, pitch, and length. If the marking is worn or missing, measure the old belt and note the tooth profile. Send the full part number 75 AT10 / 7800 AFX, or the profile, pitch, and length, to request a quote.
For drives that run more than one belt, replace all belts in the set at the same time. Confirm that each belt in the set carries the same profile, pitch, and length. This helps maintain even load sharing across the drive.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 7800mm
Frequently asked questions
- What do the profile, pitch, and length mean on this belt?
- The AT10 profile is the tooth shape. The 10 mm pitch is the center-to-center distance between teeth. The 7800 mm length is the belt's datum length. These values must match your drive's requirements.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for the profile, pitch, and length. If it is unreadable, measure the old belt and note the tooth profile. Compare those values to the AT10 profile, 10 mm pitch, and 7800 mm length of this belt.
- What information should I send to request a quote?
- Send the full part number 75 AT10 / 7800 AFX, or the profile, pitch, and length. If you are replacing a set, include the number of belts in the drive.