Timing belt Optibelt 75 AT10 / 3200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 AT10 / 3200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 AT10 / 3200 AFX and any equivalents.
This is an Optibelt Alpha Flex timing belt in the AT10 profile, with a 3200 mm length and a 10 mm pitch. The part number 75 AT10 / 3200 AFX identifies the belt, and the profile and length are the two figures to check first against your drive.
The AT10 profile is a synchronous belt profile, so the belt drives by tooth engagement rather than friction. The 10 mm pitch sets the spacing from one tooth to the next along the belt, and the 3200 mm length is the belt's length as listed. If your drive was built around an AT10 pitch, those two values are what confirm the belt will sit correctly on the pulleys and reach the take-up you have.
The cleanest way to match this belt is to read the marking on the back of the belt you are replacing. If it shows the same AT10 profile, the same 10 mm pitch and the same 3200 mm length, this Optibelt Alpha Flex belt is the one to quote. Where the marking is worn or unreadable, measure the pitch and the length instead of relying on the old belt's appearance.
When you request a quote, send the part number 75 AT10 / 3200 AFX along with the quantity and any details from the drive. Our team can confirm the belt against the profile and length you give and reply by WhatsApp or email.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 3200mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The AT10 profile and 10 mm pitch describe the tooth form and tooth spacing, and the 3200 mm length is the belt length as listed. Check both against your drive before ordering.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. If it shows AT10, a 10 mm pitch and a 3200 mm length, this Optibelt Alpha Flex belt matches those figures.
- What should I send to get a quote?
- Send the part number 75 AT10 / 3200 AFX, the quantity you need and any marking details from the existing belt. We reply by WhatsApp or email.