Timing belt Optibelt 75 AT10 / 10200 AFX

OPTIBELT 75 AT10 / 10200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 AT10 / 10200 AFX and any equivalents.

This Optibelt Alpha Flex timing belt is identified by the code 75 AT10 / 10200 AFX. It uses the AT10 profile with a 10 mm pitch and a 10200 mm length. It is a synchronous belt intended for drives where timing and positive engagement are required.

Timing belts of this type are common on industrial drives that need synchronized motion, such as positioning systems, conveyors, and other equipment where the belt teeth mesh with matching pulleys. The AT10 profile and 10 mm pitch define the tooth geometry and spacing, while the 10200 mm length sets the center distance and pulley combination it will fit.

To confirm this belt suits your drive, compare the marking on the back of the existing belt with the code above. Check that the profile is AT10, the pitch is 10 mm, and the length is 10200 mm. Also verify the belt width and the pulley tooth profile match your drive, since those are separate from the length and profile.

If you are replacing a belt and the marking is worn or missing, measure the pitch and length where possible and note the pulley type. Send the part number or those details by WhatsApp or email, and we can help confirm the right belt or suggest an equivalent.