Timing belt Optibelt 75 / 5M 7000 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 / 5M 7000 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 / 5M 7000 AFX and any equivalents.
The Optibelt 75 / 5M 7000 AFX is a timing belt in the Alpha Flex series with an HTD 5M profile and a 7000 mm length. The 5 mm pitch identifies the tooth spacing, so this belt fits drives designed around the HTD 5M system. Use the profile and length together to confirm it matches the belt you are replacing.
The 75 / 5M 7000 AFX is built to the HTD 5M profile. The 5 mm pitch is the distance from one tooth center to the next, and the 7000 mm length is the belt's own length. When you read a drive specification or an old belt, those two figures are what tell you whether this is the correct part. The Alpha Flex series is Optibelt's line for this type of synchronous belt.
If you are matching a belt already in service, check the marking on the back of the old belt. The part number 75 / 5M 7000 AFX, the HTD 5M profile and the 7000 mm length should be consistent with what is stamped or printed there. If the marking is worn or unreadable, measure the old belt and note the tooth profile before ordering.
We carry the Optibelt 75 / 5M 7000 AFX for maintenance, engineering and purchasing teams in the US, Canada, Mexico and South America. Send the part number by WhatsApp or email to request a quote. If you need help confirming the profile or length, include those details with your request.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 7000mm
Frequently asked questions
- What do the profile and length mean on this belt?
- The profile is HTD 5M, which is a synchronous belt tooth form with a 5 mm pitch. The length is 7000 mm. Both figures are needed to match the belt to a drive.
- How do I confirm this is the right replacement?
- Read the marking on the back of the belt you are replacing. The part number 75 / 5M 7000 AFX, the HTD 5M profile and the 7000 mm length should match. If the marking is not clear, measure the old belt and check the tooth profile.
- What should I send to request a quote?
- Send the part number 75 / 5M 7000 AFX by WhatsApp or email. If you are unsure about the profile or length, include those details so we can help confirm the belt.