Timing belt Optibelt 75 / 5M 6400 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 75 / 5M 6400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 / 5M 6400 AFX and any equivalents.
The Optibelt 75 / 5M 6400 AFX is an Alpha Flex timing belt with an HTD 5M profile, a 6400 mm length and a 5 mm pitch. Before you fit a new synchronous belt, inspect the drive and sheaves so the replacement runs true and lasts.
Check the sheaves for worn grooves, burrs, corrosion or debris, and confirm they are aligned and secure. Verify that the belt path is clean and that any tensioner or idler turns freely. Correcting these points before installation helps prevent edge wear and premature belt failure.
Confirm the belt marking on the back of the old belt matches the profile, length and pitch you need. This Optibelt Alpha Flex belt is identified as 75 / 5M 6400 AFX, with an HTD 5M profile, 6400 mm length and 5 mm pitch. If the marking is worn or unreadable, measure the old belt and note the drive details.
For a quote, send the part number 75 / 5M 6400 AFX, the belt marking, and the drive or sheave information. Our team can confirm the right belt for your application and suggest an equivalent where one exists.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 6400mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheaves for wear, damage or misalignment, and make sure the belt path is clear and any tensioner or idler spins freely. Addressing these points before fitting the new belt helps avoid tracking problems and early wear.
- How do I confirm this is the correct replacement belt?
- Compare the marking on the back of the old belt with the Optibelt 75 / 5M 6400 AFX identification. The profile is HTD 5M, the length is 6400 mm and the pitch is 5 mm. If the old marking is unreadable, measure the belt and note the drive details.
- What information do you need to quote this belt?
- Send the part number 75 / 5M 6400 AFX, the belt marking from the old belt, and details of the drive or sheaves. Our team will confirm the correct belt and suggest an equivalent if one is listed.