Timing belt Optibelt 75 / 5M 2200 AFX

OPTIBELT 75 / 5M 2200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 / 5M 2200 AFX and any equivalents.

This is an Optibelt Alpha Flex timing belt, part number 75 / 5M 2200 AFX. It is a synchronous belt in the HTD 5M profile with a 2200 mm length and a 5 mm pitch. Timing belts of this type are used where the drive must keep the driven shaft in step with the driver rather than rely on friction.

Synchronous belts appear on drives that need position holding and repeatable motion: cam and auxiliary drives, machine tool spindles, indexing tables, packaging and labeling equipment, pumps, and small conveyors. The teeth engage the pulley grooves, so the belt does not depend on tension alone to transmit motion. If you are replacing a belt on a drive like this, confirm that the pulley grooves are clean and free of wear before the new belt goes on.

To confirm fit, read the marking on the back of the old belt and match it against the profile and length. This belt carries the HTD 5M profile and a 2200 mm length, with a 5 mm pitch. Check the pulley tooth profile against the belt profile, and check that the belt width suits the pulley face. A belt that is the wrong profile or length will not run correctly, even if it looks close.

If the drive runs more than one belt, replace the set together so the belts share the load evenly. Inspect the pulleys for worn teeth, and check the flanges, idlers and tensioner at the same time. Send us the part number and a photo of the belt marking if you want us to confirm the right belt for your drive.