Timing belt Optibelt 75 / 5M 1400 AFX

OPTIBELT 75 / 5M 1400 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 75 / 5M 1400 AFX and any equivalents.

When a drive is down, the fastest way to identify the correct replacement is to read the marking on the back of the old belt. This page covers the Optibelt 75 / 5M 1400 AFX from the Alpha Flex series, a timing belt with an HTD 5M profile, a 1400 mm length, and a 5 mm pitch. We carry this belt and quote it by part number.

The marking on a timing belt typically shows the profile and the length, which is what you need to match. On this Optibelt belt, the profile is HTD 5M, the length is 1400 mm, and the pitch is 5 mm. Those three values are the core of the identification. If the old belt is worn, oiled, or missing teeth, clean the back with a shop towel and read the characters carefully before ordering.

A timing belt is a synchronous belt, so the teeth engage the pulleys and maintain relative position between the shafts. The HTD 5M profile is a curvilinear tooth form used in many industrial drives. When you replace a belt, inspect the pulleys for worn teeth, check the tensioner and idler bearings, and confirm the shafts turn freely. If the old belt failed early, look for misalignment, a worn tensioner, or a damaged pulley before installing the new belt.

To request a quote, send the part number 75 / 5M 1400 AFX by WhatsApp or email. If you have the old belt in hand, include a photo of the back marking and the tooth profile. Our team will confirm the belt and can suggest an equivalent if needed. We serve maintenance, engineering, and purchasing professionals across the United States, Canada, Mexico, and South America.