V-belt Optibelt 65X20 1706
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- Vario Power
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 65X20 1706 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 65X20 1706 and any equivalents.
This Optibelt Vario Power belt is a variable speed belt with the code 65X20 1706 and a length of 1706 mm. The profile and the length are the two values to check first against the belt you are replacing.
On a variable speed drive, the belt runs between sheaves that change diameter as speed changes, so the profile has to sit correctly in the groove and the length has to match the drive's center distance. The code 65X20 1706 identifies this belt, and 1706 mm is the length to compare with the old belt or with the drive documentation.
The practical check is simple: read the marking on the back of the belt you are removing and compare it with 65X20 1706. If the marking is worn or unreadable, measure the old belt and confirm the profile before ordering. Send the part number and, if you have it, a photo of the marking and the drive nameplate.
Variable speed belts are often replaced as a set when a drive uses more than one belt, so note how many the drive carries. You can request a quote for the 65X20 1706 by WhatsApp or email, and we will confirm it against your application.
Dimensions
- Length
- 1706mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile describes the cross-section that must fit the sheave grooves, and 1706 mm is the belt length. Both need to match the belt you are replacing or the drive specification.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt against 65X20 1706. If it is not readable, measure the old belt and note the drive details, then send them with your quote request.
- What should I send for a quote?
- Send the part number 65X20 1706, the quantity you need, and any photos of the old belt marking or the drive nameplate. We reply by WhatsApp or email.