Timing belt Optibelt 640 8MDC 62
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Delta Chain
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 640 8MDC 62 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 640 8MDC 62 and any equivalents.
The Optibelt 640 8MDC 62 is a Delta Chain polyurethane timing belt with a 640 mm length. It is the belt to reference when the unit you are servicing calls for this exact part number. The simplest way to confirm the match is to read the marking on the belt being replaced.
Before you order, check the back of the old belt. The part number printed there should read 640 8MDC 62. If it does, this is the belt. If the marking is worn or unreadable, note the profile and the length from the drive data and compare them with the 640 mm length listed here.
A timing belt is selected by profile and length, not by the machine alone. The 640 8MDC 62 is a Delta Chain polyurethane timing belt, and its length is 640 mm. When you send your request, include the full part number and, if possible, a photo of the old belt's marking. That lets our team confirm the belt or point you to the correct one.
If the drive uses more than one belt, replace them as a set so the load stays even across the pulleys. Inspect the pulleys and tensioner at the same time for wear or debris. Send the part number 640 8MDC 62 by WhatsApp or email, and we will reply promptly with a quote.
Dimensions
- Length
- 640mm
Frequently asked questions
- How do I confirm the 640 8MDC 62 is the right belt for my drive?
- Read the marking on the back of the belt you are replacing. If it matches 640 8MDC 62, it is the same belt. You can also send us the profile and length from your drive documentation for a comparison.
- What information should I include with my quote request?
- Send the full part number 640 8MDC 62 and, if possible, a photo of the old belt's marking. If the number is not legible, include the profile and length from the drive.
- Should I replace more than one belt at the same time?
- Yes. On drives that use multiple belts, replacing them as a set helps maintain even load distribution. Inspect the pulleys and tensioner while the belts are off.