V-belt Optibelt 6 x 850 Li
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- VB S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 6 x 850 Li belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6 x 850 Li and any equivalents.
This Optibelt VB S=C Plus belt is a classical V-belt with a Y profile and a length of 850 mm. It is used on light-duty drives where a narrow cross-section is required, such as small fans, pumps and compact machinery. Confirm fit by matching the profile and the length marked on the old belt.
Classical V-belts like this Y-profile belt are common on low-power drives in commercial and industrial equipment. The 6 x 850 Li marking gives you the cross-section and the length to compare against your existing belt. If the drive uses a Y profile, this belt is the correct section.
To confirm fit, read the marking on the back of the old belt and check that it shows the same profile and length. Also inspect the pulleys for wear and alignment before installing a new belt. If the old marking is unreadable, measure the outside length and the top width, then send those values with your quote request.
We carry the Optibelt VB S=C Plus line and can help you match this belt to your drive. Send the part number 6 x 850 Li by WhatsApp or email, and our team will confirm the belt or suggest an equivalent. For drives with multiple belts, replace the full set at the same time.
Dimensions
- Section
- Y
- Length
- 850mm
Frequently asked questions
- How do I confirm that this 6 x 850 Li belt fits my drive?
- Check the marking on the back of your old belt. It should show the same Y profile and 850 mm length. If the marking is worn, measure the top width and outside length and send those values with your request.
- What should I include when requesting a quote for this belt?
- Send the part number 6 x 850 Li and the quantity you need. If you are replacing a belt with unreadable markings, include the profile and length you measured from the old belt.
- Should I replace all belts on the drive at once?
- Yes. On drives that use multiple belts, replace the full set together so the belts share the load evenly. Mixing new and worn belts can cause uneven tension and premature wear.