Timing belt Optibelt 6 T5 / 920

OPTIBELT 6 T5 / 920 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6 T5 / 920 and any equivalents.

The Optibelt Alpha Torque 6 T5 / 920 is a timing belt with a T5 profile, a 920 mm length and a 5 mm pitch. It is the kind of synchronous belt used where the drive must keep the camshaft, pump or positioning axis in step with the motor, not simply turn it. Confirm the profile and length against the marking on the belt you are replacing before you order.

Timing belts of this type turn up on camshaft drives, injection pump drives, and on the positioning axes of packaging, printing and small CNC equipment. The teeth mesh with the pulleys, so the belt transmits motion at a fixed ratio rather than by friction. If the old belt has lost teeth, shows cracking at the roots, or has gone slack, the drive should be inspected before a replacement goes on.

To confirm fit, read the back of the old belt. You are looking for the profile, here T5, and the length, here 920 mm. The 6 in the part number refers to the belt as supplied by Optibelt; the pitch is 5 mm. Check the pulley grooves for wear and the tensioner for free movement at the same time, and replace the belt if either is out of condition. If the marking is worn off, measure the length and count the teeth, then send us those figures.