Poly-V belt Optibelt 6 EPJ 376 CO
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Poly-V belts
- Series
- Conveyor
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 6 EPJ 376 CO belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6 EPJ 376 CO and any equivalents.
This Optibelt 6 EPJ 376 CO is a Poly-V (multi-rib) belt with an EPJ profile and a 376 mm length. It is used in compact, multi-rib drives where a flat, flexible belt wraps several small pulleys at once. To confirm fit, match the profile and the length to the old belt and check the pulley grooves.
Poly-V belts are common on drives that need a thin, flexible profile with good grip across a wide pulley face. The EPJ profile and 376 mm length identify the belt's cross-section and outside length. Before ordering, read the marking on the back of the old belt and compare it with the profile and length shown here.
Inspect the drive for worn or misaligned pulleys, damaged ribs, and correct tension. A belt that is too loose can slip; one that is too tight can overload bearings. If the drive uses more than one belt, replace them as a set so the load is shared evenly.
To request a quote, send the part number 6 EPJ 376 CO by WhatsApp or email. Include the profile and length from the old belt if you have them, and our team will confirm the belt or suggest an equivalent.
Dimensions
- Profile
- EPJ
- Length
- 376mm
Frequently asked questions
- How do I confirm this Poly-V belt fits my drive?
- Match the EPJ profile and 376 mm length to the marking on your old belt, and check that the pulley grooves are clean and undamaged. If you are unsure, send the part number and a photo of the old belt marking.
- Can I replace just one belt on a multi-belt drive?
- On drives that use more than one belt, replacing them as a set helps keep tension and load even across all belts. If only one belt is worn, inspect the others for matching wear.
- What information should I send with my quote request?
- Send the part number 6 EPJ 376 CO, and if possible the profile and length from the old belt. Our team will confirm the belt or suggest an equivalent.