V-belt Optibelt 5VX 560 XEP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5VX
- Series
- Super XE-Power Pro M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5VX 560 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5VX 560 XEP and any equivalents.
The Optibelt 5VX 560 XEP is a cogged narrow V-belt in the Super XE-Power Pro M=S series. It has a 5VX profile and a length of 1422 mm. This page is for maintenance and purchasing staff who need to match it to the belt being replaced.
To match this belt, read the marking on the back of the old belt. Confirm that it shows 5VX 560 XEP, or that the profile is 5VX and the length is 1422 mm. The 560 in the part number and the 1422 mm length are the same belt size; use the marking as the primary reference.
If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 1422 mm. Also check the cross-section: a 5VX profile is a narrow V-belt, and this one is cogged. If the drive uses multiple belts, replace the full set at the same time so the load stays even.
Before ordering, inspect the sheaves for wear, alignment, and debris. A worn sheave can shorten belt life even when the replacement is correct. Send the part number 5VX 560 XEP, or the profile and length, and our team will help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 5VX
- Length
- 1422mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt. It should read 5VX 560 XEP. If it does not, confirm that the profile is 5VX and the length is 1422 mm. If the marking is gone, measure the outside length and compare it to 1422 mm.
- Can I replace just one belt in a multi-belt drive?
- For drives that use more than one belt, replace the full set at the same time. Mixing a new belt with worn belts can cause uneven tension and load sharing.
- What information should I send for a quote?
- Send the part number 5VX 560 XEP, or the profile 5VX and length 1422 mm. If you have the old belt marking or a photo of the drive, include that as well so we can help confirm the match.