V-belt Optibelt 5V KB 2650
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB SK
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5V KB 2650 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V KB 2650 and any equivalents.
The Optibelt 5V KB 2650 is a banded V-belt with a length of 6731 mm. It is built for drives that use multiple V-belts running in parallel, where the banded construction keeps the belts aligned and moving as one unit.
To match this belt to the one being replaced, start with the marking on the back of the old belt. The part number 5V KB 2650 identifies the belt you need. Confirm the profile and the length: this belt is a 5V profile with a length of 6731 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 6731 mm.
Banded V-belts are used on drives with multiple grooves, where individual belts can flip or stretch at different rates. This Optibelt belt is a single banded unit, so all the ribs stay together. When replacing, inspect the sheaves for wear and check that all grooves are clean and free of debris. If the drive uses more than one banded belt, replace them as a set to keep the load balanced.
Dimensions
- Length
- 6731mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on your old belt. If it reads 5V KB 2650, this is the correct replacement. If the marking is gone, measure the outside length and compare it to 6731 mm, and verify the profile is 5V.
- What should I send to request a quote?
- Send the part number 5V KB 2650, the quantity you need, and any details from the old belt. If you are unsure, include a photo of the belt marking and the drive sheaves.
- Can I replace just one belt in a banded set?
- Banded V-belts are designed to work as a unit. If your drive uses multiple banded belts, replace them all at the same time so the load stays evenly distributed.