V-belt Optibelt 5V KB 1400 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- KB Red Power 3
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5V KB 1400 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V KB 1400 RP and any equivalents.
This Optibelt 5V KB 1400 RP is a banded V-belt from the KB Red Power 3 series, built for drives that need multiple V-belts to work as one unit. It is used on heavy-duty industrial equipment where belt whip, vibration or load sharing across several grooves is a concern. The belt is 3556 mm long.
Banded V-belts are common on drives with several parallel grooves, such as large fans, compressors, crushers, mixers and process machinery. The band ties the individual belts together so they run as a set, which helps keep the drive running smoothly when loads are uneven or pulsating. If your drive uses a matched set of V-belts and you are replacing them, this banded construction is the type to specify.
To confirm fit, check the belt currently on the drive. Look for the marking on the back of the belt and compare the part number, the 5V profile and the 3556 mm length. Also check the number of ribs or grooves in the pulley and the width of the belt, since a banded belt must match the pulley setup. If the old belt is worn or the marking is unreadable, measure the outside length and note the pulley dimensions.
Send the part number 5V KB 1400 RP, the marking from the old belt, or the drive details by WhatsApp or email. We carry the Optibelt KB Red Power 3 line and can confirm the right belt or suggest an equivalent based on your application.
Dimensions
- Length
- 3556mm
Frequently asked questions
- What is a banded V-belt used for?
- Banded V-belts are used on drives with multiple V-grooves where the belts need to run as a single unit. They help control vibration and keep loads shared across the drive, which is common on heavy industrial equipment.
- How do I confirm this belt fits my drive?
- Check the marking on the back of the old belt and compare the part number, the 5V profile and the 3556 mm length. Also confirm the number of grooves in the pulleys and the belt width match your setup.
- What information should I send for a quote?
- Send the part number 5V KB 1400 RP, the marking from the old belt, or the drive details such as pulley dimensions and the number of grooves. You can send this by WhatsApp or email.