V-belt Optibelt 5V 670
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- SK S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5V 670 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 670 and any equivalents.
The Optibelt SK S=C Plus 5V 670 is a narrow wedge V-belt with a 5V profile and a length of 1702 mm. Before you fit it, take a few minutes to check the drive and sheaves.
Look at the sheave grooves for wear, rust, or buildup. A worn groove can let a new belt sit too low, so it slips and wears out early. Check that the sheaves are aligned and that the bearings turn freely. If you see heavy wear, correct it before installing the belt.
The same size is also listed under Mitsuboshi 5V 670 and Dayco 5V 670. If you are replacing an existing belt, read the marking on the back to confirm the profile and length. When you request a quote, send the part number and, if possible, a photo of the old belt and the drive nameplate.
For multiple-belt drives, replace all belts in the set at the same time. Mixed wear can cause uneven tension and vibration. After fitting, check tension again once the drive has run under load.
Dimensions
- Section
- 5V
- Length
- 1702mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheave grooves for wear, rust, or buildup, confirm sheave alignment, and make sure the bearings turn freely. Correct any issues before fitting the new belt.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for the profile and length. The Optibelt SK S=C Plus 5V 670 has a 5V profile and a length of 1702 mm.
- What information should I send with my quote request?
- Send the part number 5V 670 and, if possible, a photo of the old belt and the drive nameplate. The team can help confirm the right belt or suggest an equivalent.