V-belt Optibelt 5V 560
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- SK S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
MITSUBOSHI and OPTIBELT: matching part numbers →DAYCO and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5V 560 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 560 and any equivalents.
The Optibelt SK S=C Plus 5V 560 is a narrow wedge V-belt with a 5V profile and a length of 1422 mm. Before you fit a new belt, inspect the drive and sheaves so the replacement runs true and lasts.
Start by locking out the drive. Check sheave grooves for wear, rust, burrs or embedded debris, and confirm the grooves match the 5V profile. Misaligned or worn sheaves can destroy a new belt quickly, so correct any misalignment and replace damaged sheaves before fitting the Optibelt SK S=C Plus 5V 560.
Measure the old belt and compare it with the 1422 mm length. The same size is also listed under Mitsuboshi 5V 560 and Dayco 5V 560. If you are replacing a set, fit all belts at the same time and check tension with a gauge after run-in.
For a quote, send the part number 5V 560 and the quantity you need. If you are unsure about the profile or length, include a photo of the marking on the back of the old belt and the sheave dimensions so we can confirm the right belt.
Dimensions
- Section
- 5V
- Length
- 1422mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, rust, burrs or debris, and check alignment. Correct any misalignment and replace damaged sheaves before fitting the new belt.
- Can I replace just one belt in a multi-belt drive?
- For matched sets, replace all belts at the same time to keep tension even and avoid uneven load on the drive.
- What do you need to quote the Optibelt SK S=C Plus 5V 560?
- Send the part number 5V 560 and the quantity. If you want us to confirm the profile or length, include a photo of the old belt marking and the sheave dimensions.