V-belt Optibelt 5V 1320 RP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 5V
- Series
- Red Power 3 S=C Plus
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5V 1320 RP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5V 1320 RP and any equivalents.
When replacing a narrow wedge V-belt, the most reliable approach is to match the belt you are removing. The Optibelt 5V 1320 RP from the Red Power 3 S=C Plus series gives you a specific profile and length to check against the old belt's marking. This page covers what to compare before you request a quote.
Start by reading the back of the belt being replaced. The profile and length are the two identifiers that must line up: this belt is a 5V profile and 3353 mm long. If the old belt's marking shows the same 5V profile and 3353 mm length, you have a direct match to the Optibelt 5V 1320 RP. Confirm the belt cross-section as well, since a narrow wedge V-belt is not interchangeable with other V-belt profiles.
A common mistake is to match only the length or only the profile. Both matter: a belt with the correct length but the wrong profile will not seat correctly in the pulley groove. Check the old belt for wear, cracks, or glazing, and inspect the drive for misalignment or damaged sheaves before installing a replacement. If the drive runs multiple belts, replace them as a set so the load is shared evenly.
If the marking on the old belt is worn or unreadable, send us the machine or drive details along with any numbers you can read. We carry the Optibelt 5V 1320 RP and can help confirm it is the right belt or suggest an equivalent. Quotes are handled by part number through WhatsApp or email.
Dimensions
- Section
- 5V
- Length
- 3353mm
Frequently asked questions
- How do I confirm the Optibelt 5V 1320 RP is the right belt for my drive?
- Compare the profile and length on the old belt's back marking. This belt is a 5V profile, 3353 mm long. If those two values match, it is the correct replacement.
- Can I replace just one belt on a multi-belt drive?
- It is best practice to replace all belts on the drive as a set. Mixing a new belt with worn belts can cause uneven load sharing and premature wear.
- What should I send for a quote on the Optibelt 5V 1320 RP?
- Send the part number, 5V 1320 RP, along with the quantity you need. If you are unsure of the match, include the old belt's marking and any drive details.