Timing belt Optibelt 5MHP 920
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 920 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 920 and any equivalents.
The Optibelt 5MHP 920 is an HTD 5M timing belt from the Omega HP series. It has a 920 mm length and a 5 mm pitch. This synchronous belt is used on drives where the belt teeth mesh with matching pulleys to keep the driven shaft in step with the driver.
HTD 5M timing belts are common on industrial drives such as small conveyors, packaging equipment, machine tools, pumps, and other machinery that needs synchronized motion rather than friction drive. The 5 mm pitch suits compact, high-speed pulley layouts where a positive tooth engagement is required.
To confirm fit, read the marking on the back of the old belt and match the part number, profile, and length. The Optibelt 5MHP 920 is an HTD 5M profile belt, 920 mm long, with a 5 mm pitch. If the old belt is worn or the marking is unreadable, measure the belt length and count the teeth, then send those details along with the part number for a quote.
When replacing a timing belt, inspect the pulleys for worn teeth, debris, or misalignment before installation. On drives that use more than one belt, replace the full set so the load is shared evenly.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 920mm
Frequently asked questions
- How do I confirm the Optibelt 5MHP 920 is the right belt for my drive?
- Check the marking on the back of the existing belt. It should show the part number, profile, and length. This belt is HTD 5M profile, 920 mm long, with a 5 mm pitch. If the marking is not readable, measure the old belt and count its teeth, then send those details for confirmation.
- What is the 5 mm pitch on this timing belt?
- The pitch is the distance between the centers of two adjacent teeth. This belt has a 5 mm pitch, which must match the pitch of the pulleys on the drive.
- What information should I send to request a quote?
- Send the part number 5MHP 920, the profile HTD 5M, the length 920 mm, and the pitch 5 mm. If you are replacing an existing belt, include the marking from the old belt or the tooth count and measured length.