Timing belt Optibelt 5MHP 860
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 860 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 860 and any equivalents.
The Optibelt 5MHP 860 is an Omega HP timing belt with an HTD 5M profile, a 5 mm pitch and an 860 mm length. When you read the marking on the back of the old belt, confirm that it shows this part number before you request a quote.
The marking on the back of a timing belt is the most direct way to identify the correct replacement. If the old belt is worn or dirty, clean the back surface and look for the part number. The Optibelt 5MHP 860 is identified by its HTD 5M profile, 5 mm pitch and 860 mm length. Matching these three values is what confirms the belt will fit the drive.
If the marking is unreadable, measure the old belt and compare the profile and length to the data here. The Optibelt 5MHP 860 is a timing belt in the Omega HP series, with an HTD 5M profile and an 860 mm length. The 5 mm pitch is part of the profile designation and is stated for reference.
Send the part number 5MHP 860 by WhatsApp or email to request a quote. If you are replacing more than one belt on the same drive, include the quantity and any other belt numbers from the same machine. The team can confirm the belt or suggest an equivalent based on the profile and length you provide.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 860mm
Frequently asked questions
- How do I confirm the Optibelt 5MHP 860 is the right belt?
- Read the marking on the back of the old belt. If it shows 5MHP 860, the profile is HTD 5M and the length is 860 mm, it matches this belt. If the marking is unreadable, measure the old belt and compare the profile and length.
- What details should I send with my quote request?
- Send the part number 5MHP 860, the quantity you need, and any other belt numbers from the same drive. If you have the old belt, include a photo of the back marking. The team will confirm the belt or suggest an equivalent.
- Can I replace just one belt on a multi-belt drive?
- For drives with more than one belt, replacing all belts at the same time helps keep tension and wear even. Include the full set of part numbers and quantities in your request so the team can quote the complete set.