Timing belt Optibelt 5MHP 645

OPTIBELT 5MHP 645 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 645 and any equivalents.

The Optibelt 5MHP 645 is a timing belt from the Omega HP series with an HTD 5M profile and a 645 mm length. It is used in synchronous drives where teeth mesh with pulleys to keep motion timed, common in industrial machinery and power transmission equipment. Confirm fit by matching the belt marking, profile and length to your drive.

Timing belts like this HTD 5M profile belt are found on drives that need precise synchronization, such as those on industrial equipment, pumps, compressors and other machinery where slip is not acceptable. The 5 mm pitch and 645 mm length identify the belt; the HTD 5M profile determines the pulley groove shape it runs in.

To confirm this belt fits your application, check the old belt for the part number 5MHP 645 or the marking on the back. The profile HTD 5M and the length 645 mm must match the pulleys and the drive layout. If the marking is worn, measure the length and count the teeth, or send a photo of the belt and pulleys.

When requesting a quote, send the part number 5MHP 645, the profile HTD 5M and the length 645 mm. If you are replacing a belt on a drive with multiple belts, note the quantity needed. Our team can help confirm the right belt or suggest an equivalent based on the data you provide.