Timing belt Optibelt 5MHP 550
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 550 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 550 and any equivalents.
The Optibelt 5MHP 550 is an Omega HP timing belt with an HTD 5M profile and a 550 mm length. This page covers how to match it to the belt you are replacing, so you can confirm the part number before requesting a quote.
Start with the marking on the back of the old belt. Look for the part number 5MHP 550, the profile HTD 5M, and the length 550 mm. The pitch is 5 mm. If the belt is worn or dirty, wipe the back with a dry cloth and read the characters in good light.
Measure the old belt only if the marking is unreadable. Lay it flat and measure the outside circumference, then compare that number with the 550 mm length given here. Count the teeth if you can, and note the tooth shape. The HTD 5M profile has a rounded tooth form, so it will not match a different profile even if the length is close.
Once you have the part number and profile, send them by WhatsApp or email. Include the quantity and any drive details you have. The team replies promptly and can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 550mm
Frequently asked questions
- How do I confirm this is the correct replacement belt?
- Check the marking on the back of your old belt for 5MHP 550. Confirm the profile is HTD 5M and the length is 550 mm. If those match, this is the correct part number.
- What if the old belt marking is worn off?
- Measure the outside circumference of the old belt and compare it with the 550 mm length. Also confirm the tooth profile is HTD 5M. If you are unsure, send photos and measurements for review.
- What information should I send for a quote?
- Send the part number 5MHP 550, the profile HTD 5M, the length 550 mm, and the quantity you need. If you have the old belt, include a photo of the back marking.