Timing belt Optibelt 5MHP 375
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 375 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 375 and any equivalents.
The Optibelt 5MHP 375 is an Omega HP timing belt with an HTD 5M profile, a 375 mm length and a 5 mm pitch. When you are replacing a belt, the fastest way to confirm the correct part is to match these three figures to the belt you are removing.
Start with the marking on the back of the old belt. If it reads 5MHP 375, this is the belt to quote. If the old belt is worn or the marking is unreadable, measure the profile and the length instead: the profile is HTD 5M and the length is 375 mm. The pitch is 5 mm. These are the values that identify the belt, so any difference in profile or length means it is not a direct match.
If the marking is gone, check the drive before ordering. Confirm the pulley grooves accept an HTD 5M profile and that the belt path suits a 375 mm length. A belt that is too short will not seat, and one that is too long will not tension correctly. When you send your request, include the part number 5MHP 375 and, if possible, a photo of the old belt marking.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 375mm
Frequently asked questions
- What do I need to send to get a quote for this belt?
- Send the part number 5MHP 375, or the profile HTD 5M and the length 375 mm if the number is not readable. A photo of the old belt marking helps confirm the match.
- How can I be sure this is the right belt for my drive?
- Match the profile and length to the belt being replaced. This belt has an HTD 5M profile, a 375 mm length and a 5 mm pitch. If your old belt shows the same figures, it is the correct replacement.
- Can you help if my old belt marking is worn off?
- Yes. Send the profile and length you measure from the old belt, along with the part number if you have it. We will confirm whether 5MHP 375 matches your drive.