Timing belt Optibelt 5MHP 300
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 300 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 300 and any equivalents.
The Optibelt 5MHP 300 is an Omega HP timing belt with an HTD 5M profile, a 300 mm length and a 5 mm pitch. When you need to match the belt being replaced, these three figures are what you compare against the old belt and the drive.
Start by reading the marking on the back of the belt you are removing. The part number, profile and length should line up with the Optibelt 5MHP 300. If the old belt is worn or the marking is unreadable, measure the length and confirm the profile and pitch from the drive components.
The profile is HTD 5M, the length is 300 mm and the pitch is 5 mm. These values define the belt's fit on the pulleys. A belt with a different profile or pitch will not seat correctly, even if it looks similar.
When you request a quote, send the part number 5MHP 300 and, if possible, the profile, length and pitch from the old belt. Our team can confirm the belt or suggest an equivalent based on the data you provide.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 300mm
Frequently asked questions
- How do I match the Optibelt 5MHP 300 to the belt I am replacing?
- Compare the profile, length and pitch: HTD 5M, 300 mm and 5 mm. Also check the part number on the back of the old belt. If it reads 5MHP 300, it is the same belt.
- What should I send to get a quote for this belt?
- Send the part number 5MHP 300, or the profile, length and pitch from the old belt. Photos of the marking and the drive can help us confirm the correct belt.
- Can you help if the old belt marking is worn off?
- Yes. Measure the length and identify the profile and pitch from the pulleys, then send those details. We can check them against the Optibelt 5MHP 300.