Timing belt Optibelt 5MHP 1270

OPTIBELT 5MHP 1270 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 1270 and any equivalents.

This Optibelt Omega HP timing belt is identified by the code 5MHP 1270. It uses an HTD 5M profile with a 5 mm pitch and a 1270 mm length. Use these three values to confirm the belt matches your drive before you request a quote.

HTD 5M timing belts are common on compact, high-speed drives where positive, non-slip synchronization is required. The 5 mm pitch and 1270 mm length suit applications where the pulley grooves and center distance are already set for this profile. Confirm the belt by reading the marking on the back of the old belt, then compare the profile and length to the data above.

If the marking is worn or missing, measure the old belt and count the pulley teeth instead of relying on a partial number. The replacement must match the HTD 5M profile and the 1270 mm length; a belt with the same length but a different profile will not seat correctly in the grooves. Send the part number, the profile and the length to our team, and we will confirm the belt or suggest an equivalent.

For drives that use more than one belt, replace the set together so the load is shared evenly. Inspect the pulleys for worn grooves, debris or misalignment at the same time. If you are unsure whether this belt fits, send a photo of the back marking and the pulley teeth with your quote request.