Timing belt Optibelt 5MHP 1125
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega HP
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5MHP 1125 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5MHP 1125 and any equivalents.
This page covers the Optibelt 5MHP 1125 timing belt from the Omega HP series. It is an HTD 5M profile belt with a 1125 mm length and a 5 mm pitch. Before you fit it, inspect the drive and the sheaves.
A new belt on worn or damaged sheaves will not run correctly. Check the sheave grooves for wear, scoring, corrosion or embedded debris, and confirm the flanges are not bent or rubbing. Verify that the shafts and bearings turn freely and that the two sheaves are aligned. Any misalignment or runout should be corrected before the belt is installed.
Confirm the belt marking on the back of the old belt matches the profile and length you need. This belt is HTD 5M with a 5 mm pitch and an 1125 mm length. If the old marking is unreadable, measure the drive and send the profile and length, or send the part number 5MHP 1125 for a quote.
Tension should be set according to the drive manufacturer's specification for the application. After fitting, run the drive and recheck alignment and tension. Keep the sheaves clean and inspect the belt periodically for edge wear or cracking.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 1125mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheave grooves for wear, scoring or debris, check flange condition, confirm free rotation of shafts and bearings, and verify sheave alignment and runout. Correct any issues before installing the belt.
- How do I confirm this is the right belt?
- Read the marking on the back of the old belt. This belt is HTD 5M profile, 1125 mm length, 5 mm pitch. If the marking is unreadable, measure the drive and send the profile and length, or send the part number 5MHP 1125.
- How do I request a quote?
- Send the part number 5MHP 1125 by WhatsApp or email. The team replies promptly and can confirm the right belt or suggest an equivalent.