Timing belt Optibelt 5M 965
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5M 965 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5M 965 and any equivalents.
The Optibelt 5M 965 is a timing belt in the Omega series with an HTD 5M profile, a 965 mm length, and a 5 mm pitch. For a maintenance or purchasing professional, those three values are the starting point: they define the belt's cross-section and its length around the pulley path.
The profile tells you the belt's tooth geometry, and HTD 5M is a standard synchronous profile. The 5 mm pitch is the distance from one tooth center to the next, so it must match the pulleys on the drive. The 965 mm length is the belt's datum length, the dimension you compare against the marking on the old belt or the drive's specification.
When you request a quote, send the complete part number 5M 965 and the brand Optibelt, plus the belt's marking if it is still legible. If the belt is worn or the marking is gone, measure the length and confirm the profile and pitch from the pulleys. We carry Optibelt belts and can help confirm that this HTD 5M, 965 mm belt is the right fit for your drive.
Replacing a timing belt is also a chance to inspect the drive: check the pulleys for wear or debris in the grooves, confirm alignment, and verify that the belt tension is set to the drive manufacturer's specification. If the drive uses more than one belt, replace them as a set so the load stays evenly distributed.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 965mm
Frequently asked questions
- What do the profile and length mean on the Optibelt 5M 965?
- The profile is HTD 5M, which defines the tooth shape and the 5 mm pitch between tooth centers. The length is 965 mm, the datum length of the belt. Both values must match the drive.
- How do I confirm this is the correct belt for my drive?
- Compare the profile, pitch, and length against the old belt's marking or the drive documentation. If the marking is unreadable, measure the length and check the pulley grooves for the HTD 5M profile and 5 mm pitch.
- What should I send to request a quote?
- Send the part number 5M 965, the brand Optibelt, and the belt marking if you have it. If you are unsure, include the profile, pitch, and length from your drive so we can confirm the match.