Timing belt Optibelt 5M 630
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5M 630 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5M 630 and any equivalents.
This Optibelt Omega timing belt is identified by its HTD 5M profile and 630 mm length. The 5 mm pitch defines the tooth spacing that must match your drive's pulleys.
The profile and length are the two numbers that determine fit. HTD 5M is a synchronous belt profile with a 5 mm pitch, so the belt's teeth engage pulleys cut to the same pitch. The 630 mm length is the datum you compare against the marking on your old belt or the drive's specification.
When you request a quote, send the part number 5M 630 along with the application details. We carry the Optibelt Omega line and can confirm this belt matches your drive or help you find the right alternative if the profile or length differs.
For maintenance and engineering teams, replacing a timing belt starts with reading the back of the old belt. The profile and length printed there are what you match to this Optibelt Omega 5M 630. If the marking is worn or missing, measure the pitch and length or send photos of the belt and pulleys so we can verify.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 630mm
Frequently asked questions
- What do the profile and length mean on this belt?
- HTD 5M is the profile, with a 5 mm pitch between teeth. The 630 mm length is the belt's datum length. Both must match your drive's pulleys and layout.
- How do I confirm this is the right belt for my drive?
- Check the marking on your old belt. If it reads HTD 5M and 630 mm, this Optibelt Omega belt is the same size. If you are unsure, send the part number and photos of the belt and pulleys for verification.
- What information should I send with my quote request?
- Send the part number 5M 630 and any details from the old belt or drive. If you have the pulley tooth count or center distance, include those as well. We reply by WhatsApp or email.