Timing belt Optibelt 5M 460
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5M 460 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5M 460 and any equivalents.
This Optibelt 5M 460 belt is an HTD 5M timing belt from the Omega series. It has a 460 mm length and a 5 mm pitch. Timing belts in this profile are commonly used for synchronous drive applications where the belt teeth mesh with matching pulleys to maintain timing between components.
To confirm fit, check that the existing belt is marked with the same profile and length. The profile is HTD 5M, the length is 460 mm, and the pitch is 5 mm. These three values must match the drive's pulley grooves and center distance.
When requesting a quote, send the part number 5M 460 along with the profile and length from the old belt's backing. If the marking is worn, provide the pulley tooth profile and the number of teeth on each pulley, plus the center distance, so we can help confirm the correct belt.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 460mm
Frequently asked questions
- What does the marking on this belt tell me?
- The marking shows the profile and length. For this belt, the profile is HTD 5M and the length is 460 mm. The pitch is 5 mm.
- How do I confirm this timing belt fits my drive?
- Compare the profile, length, and pitch to your existing belt and pulleys. This belt has an HTD 5M profile, a 460 mm length, and a 5 mm pitch. All three must match the drive.
- What information should I send for a quote?
- Send the part number 5M 460. If you have the old belt, include the profile and length from its backing. If not, provide the pulley tooth profile, the number of teeth on each pulley, and the center distance.