Timing belt Optibelt 5M 265
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5M 265 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5M 265 and any equivalents.
The Optibelt Omega 5M 265 is a timing belt with an HTD 5M profile and a 265 mm length. The 5 mm pitch matches the HTD 5M tooth geometry. When reading the marking on the back of an old belt, confirm the profile and length before requesting a quote.
The marking on the back of a timing belt identifies the profile and length. For this belt, the marking shows 5M 265: HTD 5M profile and 265 mm length. The 5 mm pitch is the distance between tooth centers. If the old belt is worn or the marking is unreadable, measure the length and count the teeth to confirm the profile.
This Optibelt Omega belt is a synchronous belt for drives that require precise timing. It is not a V-belt, narrow V-belt, cogged belt, Poly-V, serpentine, double-V, banded, variable speed or CVT belt. Use it only where the drive is designed for an HTD 5M profile and 265 mm length.
To request a quote, send the part number 5M 265, the profile HTD 5M, and the length 265 mm by WhatsApp or email. If you are replacing a belt on a drive, inspect the pulleys for wear and check the alignment before installation. For drives with multiple belts, replace all belts at the same time.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 265mm
Frequently asked questions
- How do I confirm the marking on my old belt?
- Look for the part number on the back of the belt. This belt is marked 5M 265, which indicates the HTD 5M profile and 265 mm length. If the marking is unclear, measure the length and count the teeth to verify the profile.
- What should I send to request a quote?
- Send the part number 5M 265, the profile HTD 5M, and the length 265 mm by WhatsApp or email. If you have a photo of the old belt marking, include it to help confirm the correct belt.
- Can I use this belt on any drive?
- No. Use this belt only on drives designed for an HTD 5M profile and 265 mm length. Check that the pulleys match the 5 mm pitch and that the drive is not intended for a different belt type.