Timing belt Optibelt 5M 1420
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Omega
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 5M 1420 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 5M 1420 and any equivalents.
The Optibelt Omega 5M 1420 is a timing belt with an HTD 5M profile and a 1420 mm length. The 5 mm pitch matches the HTD 5M tooth geometry. Read the marking on your old belt to confirm the part number before ordering.
The back of a worn timing belt usually carries the profile, pitch and length in one line. On this Optibelt Omega belt, the marking shows 5M 1420, which corresponds to the HTD 5M profile, a 5 mm pitch and a 1420 mm length. If the old belt is unreadable or missing, measure the drive and note the pulley tooth profile before requesting a quote.
Send the exact part number 5M 1420 by WhatsApp or email with the quantity you need. Our team replies promptly and can help confirm that the HTD 5M profile and 1420 mm length suit your drive. If the marking on the belt is partially rubbed off, include clear photos of the belt and pulleys with your request.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 1420mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look for a printed line on the back of the belt. The Optibelt Omega timing belt is marked 5M 1420, which indicates the HTD 5M profile, 5 mm pitch and 1420 mm length.
- What should I send to request a quote for this belt?
- Send the part number 5M 1420 and the quantity you need by WhatsApp or email. If the old belt marking is difficult to read, include photos of the belt and the drive pulleys.
- Does the 5M 1420 belt fit my drive?
- This belt has an HTD 5M profile, a 5 mm pitch and a 1420 mm length. Confirm that your pulleys use the HTD 5M profile and that the drive requires a 1420 mm belt. Our team can help verify the profile and length from your old belt marking.