Timing belt Optibelt 55 / 14M 9702 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 55 / 14M 9702 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 55 / 14M 9702 AFX and any equivalents.
When you need to replace a timing belt, start by reading the marking on the back of the old belt. The Optibelt 55 / 14M 9702 AFX is a timing belt with an HTD 14M profile, a length of 9702 mm, and a 14 mm pitch. Match those three details to the belt you are replacing.
The marking on the back of a belt gives you the profile and the length. For this belt, the profile is HTD 14M, the length is 9702 mm, and the pitch is 14 mm. The part number 55 / 14M 9702 AFX belongs to the Optibelt Alpha Flex series. Write down the full marking before you remove the belt, because the print can wear off once the belt is off the drive.
If the marking is unreadable, measure the belt and count the teeth. Then send the part number, the profile, the length, and the pitch to MR Industrial Accessories. We carry Optibelt belts and can confirm the right belt or suggest an equivalent. You can reach us by WhatsApp or email, and we reply promptly.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 9702mm
Frequently asked questions
- How do I read the marking on the back of the belt?
- Look for the part number and the profile on the back of the belt. For this belt, the marking shows 55 / 14M 9702 AFX, the profile is HTD 14M, and the length is 9702 mm. Note the 14 mm pitch as well.
- What should I send to request a quote?
- Send the part number 55 / 14M 9702 AFX, the profile HTD 14M, the length 9702 mm, and the pitch 14 mm. If you have the old belt, send a photo of the marking. We will confirm the right belt or suggest an equivalent.
- Can you help if the marking is worn off?
- Yes. Measure the length and width, count the teeth, and note the profile. Send those details along with any partial part number. We carry Optibelt belts and will help you identify the correct replacement.