Timing belt Optibelt 55 / 14M 7350 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 55 / 14M 7350 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 55 / 14M 7350 AFX and any equivalents.
The Optibelt 55 / 14M 7350 AFX is an Alpha Flex timing belt in HTD 14M profile with a 7350 mm length and 14 mm pitch. Before this synchronous belt goes on, the drive itself is worth a look. Sheave wear, misalignment and damaged teeth will shorten the life of any new belt, so a short inspection now saves a repeat job later.
Start with the sheaves. Check the tooth flanks for wear, cracks or flattened profiles, and confirm both pulleys are clean and free of burrs that could cut into the belt. A worn sheave will not seat the teeth correctly, which shows up as noise, edge wear or rapid tooth loss on the replacement belt.
Next, check alignment and tension. Look for the belt running against a flange, uneven wear across the width, or a drive that has shifted on its base. Confirm the shafts and bearings turn freely, then set tension according to the drive requirements. On a belt of this length, a small alignment error at one end shows up as significant tracking drift at the other.
To request a quote, send the part number 55 / 14M 7350 AFX by WhatsApp or email. If you are working from an old belt, the marking on the back is the fastest way to confirm the profile and length, and we can help verify the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 7350mm
Frequently asked questions
- What are the profile and length of the Optibelt 55 / 14M 7350 AFX?
- It is an HTD 14M profile timing belt with a 7350 mm length and a 14 mm pitch, from the Optibelt Alpha Flex series.
- How do I request a quote for this belt?
- Send the part number 55 / 14M 7350 AFX by WhatsApp or email. We reply promptly and can help confirm the right belt or suggest an equivalent.
- What should I check on the drive before fitting this belt?
- Inspect both sheaves for tooth wear, cracks and burrs, check alignment and tracking, confirm the bearings turn freely, and set tension to the drive requirements.