Timing belt Optibelt 55 / 14M 4396 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 55 / 14M 4396 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 55 / 14M 4396 AFX and any equivalents.
This Optibelt Alpha Flex belt is an HTD 14M timing belt with a 4396 mm length and a 14 mm pitch. It is the kind of synchronous belt used on drives where the belt teeth mesh with matching pulleys to keep the driven shaft in step with the driver.
Confirming fit starts with the belt you are replacing. Read the marking on the back of the old belt and compare it with the code 55 / 14M 4396 AFX, then check the profile and the length against the drive. The profile must be HTD 14M and the length must be 4396 mm; a belt that is close on one dimension but not the other will not seat correctly on the pulleys.
Inspect the drive before ordering. Look at the pulley teeth for wear or debris, check that the pulleys are aligned, and check the tension and the condition of any idler or tensioner. If the drive runs more than one belt, note how many are fitted so the replacement set can be planned.
We carry the Optibelt 55 / 14M 4396 AFX and quote by part number. Send the code from the back of the belt, the quantity you need, and a photo of the marking if it is worn. If the marking is unreadable, send the pulley tooth profile and the center distance so the team can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 4396mm
Frequently asked questions
- What does the marking on the belt tell me?
- The code 55 / 14M 4396 AFX identifies the belt. The 14M in the code matches the HTD 14M profile, and 4396 matches the 4396 mm length. Use the marking together with the pulley profile to confirm the replacement.
- How do I confirm this belt fits my drive?
- Check that the pulleys are HTD 14M, that the belt length is 4396 mm, and that the belt width matches the pulley groove. Also check alignment, tension and pulley condition before fitting a new belt.
- What should I send for a quote?
- Send the part number 55 / 14M 4396 AFX and the quantity. If the old belt marking is worn, send a photo of it or the pulley profile and center distance instead, and the team will help confirm the belt.