Timing belt Optibelt 55 / 14M 4102 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 55 / 14M 4102 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 55 / 14M 4102 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 55 / 14M 4102 AFX. It uses the HTD 14M profile with a 14 mm pitch and a 4102 mm length. It is a synchronous belt intended for drives that require exact timing between the pulley teeth and the belt teeth.
HTD 14M timing belts are common on industrial drives where the belt must transmit motion without slip. Typical uses include main drive systems on process equipment, pumps, compressors, and other machinery where the pulley grooves match the 14M profile. Because the teeth engage the pulley, the belt keeps the driven shaft synchronized with the driver.
To confirm this belt fits your drive, check the old belt's back marking for the profile and length. The profile must be HTD 14M, and the length must be 4102 mm. Also verify the belt width and the number of teeth on the pulleys match your drive design. If the marking is worn, measure the pitch and the overall length with a belt gauge or compare against the drive's original specification.
When requesting a quote, send the complete code 55 / 14M 4102 AFX along with the machine or drive reference. If you have the old belt, include a photo of the back marking. Our team can confirm the profile and length and help you identify the correct replacement.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 4102mm
Frequently asked questions
- What does the code 55 / 14M 4102 AFX tell me about this belt?
- The code identifies an Optibelt Alpha Flex timing belt with an HTD 14M profile, a 14 mm pitch, and a 4102 mm length. Use these values to match your drive requirements.
- How do I confirm this timing belt will fit my drive?
- Check that your pulleys use the HTD 14M profile and that the required belt length is 4102 mm. Also confirm the belt width and pulley tooth count match your drive design.
- What should I send to get a quote for this belt?
- Send the full code 55 / 14M 4102 AFX and any machine or drive reference you have. A photo of the old belt's back marking helps us verify the profile and length.