Timing belt Optibelt 55 / 14M 3500 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 55 / 14M 3500 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 55 / 14M 3500 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 55 / 14M 3500 AFX. It uses an HTD 14M profile with a 14 mm pitch and a 3500 mm length. It is a synchronous belt intended for drives that require exact timing between the pulley teeth and the belt.
Timing belts of this type are used on industrial drives where the belt must mesh with matching pulleys to maintain synchronization. The HTD 14M profile and 14 mm pitch mean the pulley grooves must be cut to the same profile and pitch. The 3500 mm length is the datum length for this belt, and it must match the drive's required length or the belt will not tension correctly.
To confirm fit, read the marking on the back of the old belt and compare it with the code 55 / 14M 3500 AFX. Check the profile, pitch, and length against the drive documentation or by measuring the old belt. If the marking is worn or missing, send a photo of the belt and the drive setup for identification.
When requesting a quote, include the part number 55 / 14M 3500 AFX and the quantity needed. If you are replacing a belt on a drive with multiple belts, note that these are not banded and should be replaced as individual belts unless the drive specifies otherwise. We carry Optibelt Alpha Flex timing belts and can help confirm the correct replacement.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 3500mm
Frequently asked questions
- What does the code 55 / 14M 3500 AFX mean?
- The code identifies this as an Optibelt Alpha Flex timing belt with an HTD 14M profile, a 14 mm pitch, and a 3500 mm length. Use these three values to match it to your drive.
- How can I confirm this belt fits my drive?
- Compare the profile, pitch, and length with your drive specifications or the marking on the old belt. If you cannot read the old marking, send a photo of the belt and the pulleys for help with identification.
- Can I replace just one belt on a multi-belt drive?
- This is a single timing belt, not a banded set. On drives with multiple belts, replace all belts at the same time to maintain even tension and alignment unless the drive documentation states otherwise.