Timing belt Optibelt 55 / 14M 3206 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 55 / 14M 3206 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 55 / 14M 3206 AFX and any equivalents.
The Optibelt 55 / 14M 3206 AFX is an Alpha Flex timing belt built on the HTD 14M profile. Its 3206 mm length and 14 mm pitch are the two figures that decide whether it fits your drive, so confirm both against the belt you are replacing before you request a quote.
Reading the profile first narrows the field quickly. HTD 14M sets the tooth form and the 14 mm pitch, so the belt only runs on a matching 14M pulley. The 3206 mm length then positions the belt around that drive. If your old belt carries the same profile and length, this is the direct match.
The belt is part of the Optibelt Alpha Flex series, and we carry it under part number 55 / 14M 3206 AFX. Send that number by WhatsApp or email and our team will confirm the belt or suggest an equivalent. Photographs of the back marking and the pulley teeth help us verify the profile and length.
For drives running more than one belt, replace the full set together so the load stays evenly shared. Inspect the pulleys at the same time for worn teeth, alignment and tension, since any of these will shorten the life of a new belt.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 3206mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The HTD 14M profile fixes the tooth shape and the 14 mm pitch, so the belt requires 14M pulleys. The 3206 mm length sets how the belt sits around the drive. Both must match the belt being replaced.
- How do I confirm this is the right belt for my drive?
- Check the marking on the back of the old belt for the profile and length, and compare them with HTD 14M and 3206 mm. If the marking is unreadable, send us photos of the belt and the pulleys.
- What should I send to request a quote?
- Send the part number 55 / 14M 3206 AFX, the quantity you need, and the drive it runs on. If you are unsure of the number, send the old belt marking and we will help confirm it.