Timing belt Optibelt 55 / 14M 10598 AFX

OPTIBELT 55 / 14M 10598 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 55 / 14M 10598 AFX and any equivalents.

This Optibelt Alpha Flex timing belt is identified by the code 55 / 14M 10598 AFX. It uses the HTD 14M profile with a 14 mm pitch and a 10598 mm length. This type of synchronous belt is commonly used in industrial drives where exact timing between shafts is required.

To confirm fit, check that the existing belt marking matches 55 / 14M 10598 AFX and that the drive accepts an HTD 14M profile with a 14 mm pitch and a 10598 mm length. The belt is a timing belt, so the tooth profile and length must match the pulleys and the drive layout. If the marking is worn or unreadable, measure the length and count the teeth to cross-check against the part number.

When replacing a timing belt, inspect the pulleys for wear, verify the tensioner operates correctly, and confirm the belt runs straight without rubbing. If the drive uses multiple belts, replace them as a set to keep loads even. After installation, recheck tension and alignment before running the drive.

For a quote, send the full part number 55 / 14M 10598 AFX by WhatsApp or email. If you are unsure about the profile or length, include photos of the old belt marking and the drive. The team can confirm the belt or suggest an equivalent.