Timing belt Optibelt 55 / 14M 10206 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 55 / 14M 10206 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 55 / 14M 10206 AFX and any equivalents.
This is an Optibelt Alpha Flex timing belt, part number 55 / 14M 10206 AFX. It uses the HTD 14M profile with a 14 mm pitch and a 10206 mm length. Belts in this profile and length range are typically found on high-torque industrial drives, where the belt runs on matching HTD pulleys.
To confirm fit before you order, read the marking on the back of the belt you are replacing and compare it against the profile, pitch and length shown here. The HTD 14M profile and 10206 mm length identify the belt; the drive's pulley grooves must match the same profile and pitch. If the old belt is worn or the marking is unreadable, measure the drive and send us what you have.
On long-center drives, check pulley alignment, groove wear and belt tension as part of the same job. A belt that has run loose or misaligned can damage pulley grooves, so inspect them before installing a replacement. If the drive uses more than one belt, replace the set together so the load stays evenly shared.
We carry the Optibelt Alpha Flex line and quote by part number. Send the part number 55 / 14M 10206 AFX, or the profile, pitch and length from the old belt, by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 10206mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Match the HTD 14M profile, 14 mm pitch and 10206 mm length to the marking on the belt you are replacing and to the pulley grooves on the drive. If the marking is gone, measure the drive and send the details.
- What should I send for a quote?
- Send the part number 55 / 14M 10206 AFX, or the profile, pitch and length from the old belt, by WhatsApp or email. Photos of the belt marking and the pulleys help us confirm the match.
- Should I replace more than one belt at a time?
- If the drive runs multiple belts, replace them as a set so tension and load stay even across the drive. Inspect pulley grooves and alignment at the same time.