Timing belt Optibelt 50 DAT10 / 4200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 DAT10 / 4200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 DAT10 / 4200 AFX and any equivalents.
This Optibelt belt is a double-sided timing belt from the Alpha Flex series, identified by the code 50 DAT10 / 4200 AFX. The two specifications that matter most when selecting it are the profile and the length: the profile must match the pulleys on both sides of the drive, and the length must match the routing. This page covers what those values tell you before you request a quote.
The code 50 DAT10 / 4200 AFX combines a double-sided timing profile with a 4200 mm length. A double-sided timing belt carries teeth on both faces, so it drives from either side of the belt rather than one. The profile governs how the teeth seat in the pulleys; the 4200 mm length governs how the belt routes around the drive. Both values must agree with the original belt for the replacement to fit and run correctly.
When you request a quote, send the full code as it appears on the belt: 50 DAT10 / 4200 AFX. If the marking is worn, check the drive for the profile and confirm the length by routing. We carry the Optibelt Alpha Flex line and can help confirm this double-sided timing belt or suggest an equivalent.
Dimensions
- Length
- 4200mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The profile tells you the tooth shape and pitch that must match the pulleys, and the 4200 mm length tells you the belt's length around the drive. Both are fixed specifications: a different profile will not seat correctly, and a different length will not route correctly. Use both values when comparing against the belt you are replacing.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the old belt and compare it to 50 DAT10 / 4200 AFX. If the marking is not legible, measure or count the teeth and confirm the length by routing the belt path. Send those details with your quote request and we can help confirm the match.
- What should I send to request a quote?
- Send the full part number, 50 DAT10 / 4200 AFX, and the quantity you need. If you are replacing a belt on a drive with more than one belt, note that as well. You can send this by WhatsApp or email, and we will reply promptly.