Timing belt Optibelt 50 AT5K6 / 2600 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 AT5K6 / 2600 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 AT5K6 / 2600 AFX and any equivalents.
When a timing belt is due for replacement, the belt itself is only part of the job. The Optibelt 50 AT5K6 / 2600 AFX from the Alpha Flex series is a timing belt with an AT5 profile, a 2600 mm length and a 5 mm pitch. Before fitting it, inspect the drive and sheaves so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs, corrosion or embedded debris, and confirm they are clean and aligned. Any roughness or misalignment will shorten the life of a new belt and can cause noise or tracking problems. Verify that the correct tensioning procedure is used for the drive, and rotate the system by hand to confirm the belt seats properly in every groove.
Match the old belt by reading the marking on the back and comparing it with the profile and length above. The AT5 profile and 2600 mm length identify this belt, and the 5 mm pitch confirms the tooth spacing. If the marking is worn or unreadable, measure the length and check the profile before ordering.
For a quote, send the part number 50 AT5K6 / 2600 AFX, the quantity and any drive details you have. If you are unsure whether this is the right belt, our team can help confirm the profile and length or suggest an equivalent. We carry Optibelt belts and serve maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 2600mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Read the marking on the back of the old belt and compare it with the part number, profile and length shown here. If the marking is not legible, measure the length and check the tooth profile.
- What should I inspect before installing a new timing belt?
- Inspect the sheaves for wear, damage or debris, check alignment, and confirm the drive turns freely. Correct tension and clean, true-running sheaves help the new belt seat and track properly.
- What information do you need to quote this belt?
- Send the part number 50 AT5K6 / 2600 AFX and the quantity you need. If you are unsure about the profile or length, include the drive details and we can help confirm the right belt or suggest an equivalent.