Timing belt Optibelt 50 AT5 / 6200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 AT5 / 6200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 AT5 / 6200 AFX and any equivalents.
The Optibelt 50 AT5 / 6200 AFX is an Alpha Flex timing belt with an AT5 profile, a 6200 mm length, and a 5 mm pitch. Before you fit a new synchronous belt on any drive, inspect the sheaves and the rest of the drive for wear or damage. A worn sheave can shorten the life of even a correctly sized belt.
Check the sheave grooves for wear, corrosion, or embedded debris. Look for uneven groove depth, ridges, or a step at the bottom of the groove. Verify that the sheaves are aligned and that the bearings turn freely. If the old belt failed, identify the cause before installing the new one.
Confirm the part number on the back of the old belt matches the Optibelt 50 AT5 / 6200 AFX. The AT5 profile and 6200 mm length are the key dimensions to verify. If the marking is worn or unreadable, measure the old belt and check the drive documentation.
Send the part number, the belt marking, and any photos of the drive and sheaves to MR Industrial Accessories. Our team replies promptly by WhatsApp or email and can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 6200mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheave grooves for wear, corrosion, or debris, and check alignment and bearing condition. Correct any drive problems before fitting the new belt.
- How do I confirm the Optibelt 50 AT5 / 6200 AFX is the right belt?
- Compare the part number on the back of the old belt and verify the AT5 profile, 6200 mm length, and 5 mm pitch. If the marking is unreadable, measure the old belt and check the drive documentation.
- What information does MR need to quote this belt?
- Send the part number, the belt marking, and photos of the drive and sheaves by WhatsApp or email. The team replies promptly and can help confirm the right belt or suggest an equivalent.