Timing belt Optibelt 50 AT5 / 11200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 AT5 / 11200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 AT5 / 11200 AFX and any equivalents.
This page covers the Optibelt 50 AT5 / 11200 AFX timing belt from the Alpha Flex series. It is an AT5 profile synchronous belt with a 11200 mm length and a 5 mm pitch, and we carry it for maintenance, engineering and purchasing teams.
To match this belt to the one being replaced, read the marking on the back of the old belt first. The profile, AT5, and the length, 11200 mm, are the two values that must line up. If the marking is worn or unreadable, measure the pitch and the overall length on the drive and compare them with the 5 mm pitch and 11200 mm length of this belt.
The Alpha Flex series from Optibelt is built for synchronous drives where the belt teeth mesh with the pulley grooves. This belt uses the AT5 profile, so the pulley grooves must be cut to that same profile. Confirm the belt width against the pulley face before ordering, since the part number 50 AT5 / 11200 AFX identifies one specific belt.
When you send your request, include the part number 50 AT5 / 11200 AFX and, if you have it, the old belt marking and the drive details. Our team can confirm the belt or suggest an equivalent. We serve customers in the United States, Canada, Mexico and South America by WhatsApp or email.
Dimensions
- Profile
- AT5
- Pitch
- 5mm
- Length
- 11200mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the belt you are replacing. The profile should read AT5 and the length should read 11200 mm. If the marking is gone, measure the pitch and length on the drive and compare them with the 5 mm pitch and 11200 mm length of this belt.
- What should I send with my quote request?
- Send the part number 50 AT5 / 11200 AFX. If you have the old belt, include a photo of the back marking and the drive details. That lets us confirm the belt or suggest an equivalent.
- Can you help if I only have the old belt?
- Yes. Send a photo of the marking on the old belt or the measurements you can take from the drive. We will compare them with the AT5 profile and 11200 mm length of this Optibelt Alpha Flex belt.