Timing belt Optibelt 50 AT20 / 10800 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 AT20 / 10800 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 AT20 / 10800 AFX and any equivalents.
The Optibelt 50 AT20 / 10800 AFX is an Alpha Flex timing belt with an AT20 profile, a 10800 mm length, and a 20 mm pitch. Before you install it, inspect the drive and sheaves so the new belt runs true and lasts. We carry this belt and quote by part number.
A timing belt replacement is only as good as the drive it runs on. Check sheave grooves for wear, cracks, or debris, confirm the sheaves are aligned, and verify that the tensioner and idler pulleys turn freely. Any roughness or misalignment will shorten the life of a new belt, regardless of its profile or length.
The 50 AT20 / 10800 AFX is an AT20 profile belt with a 10800 mm length and 20 mm pitch. Match these three values to the belt you are replacing. If the old belt marking is worn, clean the back of the belt and read the profile and length directly. Send us the part number or the full marking for a quote.
When you request a quote, include the part number 50 AT20 / 10800 AFX and the quantity you need. If you are replacing multiple belts on the same drive, let us know so we can help you confirm the right belt for each position. Our team replies promptly by WhatsApp or email.
Dimensions
- Profile
- AT20
- Pitch
- 20mm
- Length
- 10800mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect sheave grooves for wear or damage, confirm sheave alignment, and check that all pulleys and tensioners rotate freely. Correct any issues before installing the new belt.
- How do I confirm this is the right belt for my application?
- Compare the profile, length, and pitch to your current belt. This belt has an AT20 profile, a 10800 mm length, and a 20 mm pitch. If the marking is unreadable, send us the part number or a photo of the belt.
- How do I request a quote?
- Send the part number 50 AT20 / 10800 AFX and the quantity you need by WhatsApp or email. Our team will reply promptly.