Timing belt Optibelt 50 AT10K13 / 6200 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 AT10K13 / 6200 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 AT10K13 / 6200 AFX and any equivalents.
This Optibelt Alpha Flex timing belt is identified by the code 50 AT10K13 / 6200 AFX. It uses the AT10 profile with a 10 mm pitch and a 6200 mm length. Use the marking on the belt and your drive data to confirm it matches before ordering.
AT10 profile timing belts are common on synchronous drives where the belt must mesh with a matching pulley groove. The 10 mm pitch and 6200 mm length define the fit, so check both against the old belt or the drive specification. If the marking on the back of the belt reads 50 AT10K13 / 6200 AFX, this is the same item.
To confirm fit, note the profile, pitch and length from the belt you are replacing. Measure the length only if the marking is unreadable, and compare it to 6200 mm. The AT10 profile is not interchangeable with other profiles, so the pulley grooves must match.
Send the part number 50 AT10K13 / 6200 AFX by WhatsApp or email to request a quote. If you are unsure of the exact code, send a photo of the belt marking and the drive details. We carry Optibelt belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 6200mm
Frequently asked questions
- What does the code 50 AT10K13 / 6200 AFX identify?
- It identifies an Optibelt Alpha Flex timing belt with an AT10 profile, a 10 mm pitch and a 6200 mm length. The code is specific to this belt.
- How do I confirm this belt fits my drive?
- Check the profile, pitch and length against the old belt or the drive specification. The AT10 profile must match the pulley grooves, and the length must be 6200 mm.
- What should I send to request a quote?
- Send the part number 50 AT10K13 / 6200 AFX by WhatsApp or email. If you do not have the number, send a photo of the belt marking and the drive details.