Timing belt Optibelt 50 AT10K13 / 2100 AFX
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- Alpha Flex
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT 50 AT10K13 / 2100 AFX belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 50 AT10K13 / 2100 AFX and any equivalents.
When a drive is down, the fastest way to the right replacement is matching the belt you are removing. This Optibelt Alpha Flex timing belt carries the code 50 AT10K13 / 2100 AFX, an AT10 profile and a 2100 mm length. Confirm those markings on the old belt, then send the code to our team for a quote.
Start at the back of the belt. Read the full marking and compare it with the code 50 AT10K13 / 2100 AFX. The profile is AT10 and the pitch is 10 mm; the length is 2100 mm. If the printing is worn, measure the old belt and check the pulley grooves before ordering.
A belt that has run for years can stretch or lose teeth, so a visual match is not enough. Confirm the profile and the length in millimeters, and note the belt's width if your drive uses more than one width. Any mismatch in profile or length will show up as poor seating or tracking.
For a quote, send the part number 50 AT10K13 / 2100 AFX by WhatsApp or email. If you are unsure, include a photo of the back marking and the pulley. Our team replies promptly and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- AT10
- Pitch
- 10mm
- Length
- 2100mm
Frequently asked questions
- How do I confirm this is the belt I need?
- Read the marking on the back of the belt being replaced. It should show 50 AT10K13 / 2100 AFX, or at least the AT10 profile and 2100 mm length. If the marking is unreadable, measure the old belt and check the pulley profile.
- What does the 2100 mm length refer to?
- It is the belt's length in millimeters as listed for this Optibelt Alpha Flex timing belt. The pitch is 10 mm and the profile is AT10. Do not convert these values; use them as given when comparing with the old belt.
- What should I send to request a quote?
- Send the part number 50 AT10K13 / 2100 AFX by WhatsApp or email. If you want us to confirm the match, include a photo of the back marking and the pulley so we can check the profile and length.